L925B Optical Fiber Mechanical Splice
Refers to the mechanical connection of the cable through the "cold joint", the entire connection process can be completed within 2 minutes.
This connector is different from fast connecor.
|Applicable for||φ0.25 mm & φ0.90 mm fiber|
|Optical fiber diameter||125μm ( 652 & 657 )|
|Tight buffer diameter||250μm & 900μm|
|Applicable mode||single & multimode|
|Operation time||about 10s (without fiber cut)|
|Insert loss||≤ 0. 25 dB(1310nm & 1550nm)|
|Return loss||≤ -45dB|
|Fastening strength of naked fiber||>5 N|
|Clamping force of fiber with tight buffer||>8 N|
|Reusability (10 times)||IL ≤ 0.2dB RL ≤ 5dB|
Step 3.Cut the fiber as shown . The reducer is used to adapt the fiber (coating diameter=0.25mm) to the splicer.Length of fiber is 12.5mm.
Step 4 .Put the fiber (coating diameter=0.25mm)through the reducer into the splicer .Push the tube .
Make sure the fiber is to the end . Fit the tube .
Step 5.Press the side cover .